components:
  schemas:
    LogEntry_v1_1_5_EventSeverity:
      enum:
      - OK
      - Warning
      - Critical
      type: string
      x-enumDescriptions:
        Critical: A critical condition requiring immediate attention.
        OK: Informational or operating normally.
        Warning: A condition requiring attention.
    LogEntry_v1_1_5_Links:
      additionalProperties: false
      description: Contains references to other resources that are related to this
        resource.
      properties:
        Oem:
          $ref: http://redfish.dmtf.org/schemas/v1/Resource.yaml#/components/schemas/Resource_Oem
          description: Oem extension object.
          x-longDescription: This object represents the Oem property.  All values
            for resources described by this schema shall comply to the requirements
            as described in the Redfish specification.
        OriginOfCondition:
          $ref: http://redfish.dmtf.org/schemas/v1/odata.v4_0_3.yaml#/components/schemas/odata_v4_0_3_idRef
          description: This is the URI of the resource that caused the log entry.
          readOnly: true
          x-longDescription: The value of this property shall be an href that references
            the resource for which the log is associated.
      type: object
      x-longDescription: This type, as described by the Redfish Specification, shall
        contain references to resources that are related to, but not contained by
        (subordinate to), this resource.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_.]+$:
          description: This property shall specify a valid odata or Redfish property.
    LogEntry_v1_1_5_LogEntry:
      additionalProperties: false
      description: This resource defines the record format for a log.  It is designed
        to be used for SEL logs (from IPMI) as well as Event Logs and OEM-specific
        log formats.  The EntryType field indicates the type of log and the resource
        includes several additional properties dependent on the EntryType.
      properties:
        '@odata.context':
          $ref: http://redfish.dmtf.org/schemas/v1/odata.v4_0_3.yaml#/components/schemas/odata_v4_0_3_context
        '@odata.etag':
          $ref: http://redfish.dmtf.org/schemas/v1/odata.v4_0_3.yaml#/components/schemas/odata_v4_0_3_etag
        '@odata.id':
          $ref: http://redfish.dmtf.org/schemas/v1/odata.v4_0_3.yaml#/components/schemas/odata_v4_0_3_id
        '@odata.type':
          $ref: http://redfish.dmtf.org/schemas/v1/odata.v4_0_3.yaml#/components/schemas/odata_v4_0_3_type
        Created:
          description: The time the log entry was created.
          format: date-time
          readOnly: true
          type: string
          x-longDescription: The value of this property shall be the time at which
            the log entry was created.
        Description:
          $ref: http://redfish.dmtf.org/schemas/v1/Resource.yaml#/components/schemas/Resource_Description
          nullable: true
          readOnly: true
        EntryCode:
          $ref: '#/components/schemas/LogEntry_v1_1_5_LogEntryCode'
          description: If the EntryType is SEL, this will have the entry code for
            the log entry.
          nullable: true
          readOnly: true
          x-longDescription: This property shall be present if the EntryType value
            is SEL.  These enumerations are the values from tables 42-1 and 42-2 of
            the IPMI specification.
        EntryType:
          $ref: '#/components/schemas/LogEntry_v1_1_5_LogEntryType'
          description: This is the type of log entry.
          readOnly: true
          x-longDescription: This property shall represent the type of LogEntry.  If
            the resource represents an IPMI SEL log entry, the value shall be SEL.  If
            the resource represents an Event log, the value shall be Event.  If the
            resource represents an OEM log format, the value shall be Oem.
        EventId:
          description: This is a unique instance identifier of an event.
          readOnly: true
          type: string
          x-longDescription: If present, this LogEntry records an Event and the value
            shall indicate a unique identifier for the event, the format of which
            is implementation dependent.
          x-versionAdded: v1_1_0
        EventTimestamp:
          description: This is time the event occurred.
          format: date-time
          readOnly: true
          type: string
          x-longDescription: If present, this LogEntry records an Event and the value
            shall be the time the event occurred.
          x-versionAdded: v1_1_0
        EventType:
          $ref: http://redfish.dmtf.org/schemas/v1/Event.yaml#/components/schemas/Event_EventType
          description: This indicates the type of an event recorded in this log.
          readOnly: true
          x-longDescription: If present, this LogEntry records an Event and the value
            shall indicate the type of event.
          x-versionAdded: v1_1_0
        Id:
          $ref: http://redfish.dmtf.org/schemas/v1/Resource.yaml#/components/schemas/Resource_Id
          readOnly: true
        Links:
          $ref: '#/components/schemas/LogEntry_v1_1_5_Links'
          description: Contains references to other resources that are related to
            this resource.
          x-longDescription: The Links property, as described by the Redfish Specification,
            shall contain references to resources that are related to, but not contained
            by (subordinate to), this resource.
        Message:
          description: This property decodes from EntryType.  If the EntryType is
            Event, then it is a message string.  Otherwise, it is SEL or OEM specific.  In
            most cases, this will be the actual Log Entry.
          nullable: true
          readOnly: true
          type: string
          x-longDescription: The value of this property shall be the Message property
            of the event if the EntryType is Event, the Description if the EntryType
            is SEL, and OEM Specific if the EntryType is Oem.
        MessageArgs:
          description: The values of this property shall be any arguments for the
            message.
          items:
            type: string
          readOnly: true
          type: array
          x-longDescription: This contains message arguments to be substituted into
            the message included or in the message looked up via a registry.
        MessageId:
          description: This property decodes from EntryType.  If the EntryType is
            Event, then it is a message id.  If the EntryType is SEL, then it contains
            the Event Data.  Otherwise, it is OEM specific.  This value is only used
            for registries - for more information, see the specification.
          readOnly: true
          type: string
          x-longDescription: The value of this property shall the MessageId property
            of the event if the EntryType is Event, the three IPMI Event Data bytes
            if the EntryType is SEL, and OEM Specific if the EntryType is Oem.  The
            format of this property shall be as defined in the Redfish specification.  If
            representing the three IPMI Event Data bytes, the format should follow
            the pattern '^0[xX](([a-fA-F]|[0-9]){2}){3}$', where Event Data 1 is the
            first byte in the string, Event Data 2 is the second byte in the string,
            and Event Data 3 is the third byte in the string.
        Name:
          $ref: http://redfish.dmtf.org/schemas/v1/Resource.yaml#/components/schemas/Resource_Name
          readOnly: true
        Oem:
          $ref: http://redfish.dmtf.org/schemas/v1/Resource.yaml#/components/schemas/Resource_Oem
          description: This is the manufacturer/provider specific extension moniker
            used to divide the Oem object into sections.
          x-longDescription: The value of this string shall be of the format for the
            reserved word *Oem*.
        OemRecordFormat:
          description: If the EntryType is Oem, this will contain more information
            about the record format from the Oem.
          nullable: true
          readOnly: true
          type: string
          x-longDescription: The value of this property shall represent the OEM specific
            format of the Entry.  This property shall be required if the value of
            EntryType is Oem.
        SensorNumber:
          description: This property decodes from EntryType.  If the EntryType is
            SEL, it is the sensor number.  If the EntryType is Event, then the count
            of events.  Otherwise, it is OEM specific.
          nullable: true
          readOnly: true
          type: integer
          x-longDescription: The value of this property shall be the IPMI sensor number
            if the EntryType is SEL, the count of events if the EntryType is Event,
            and OEM Specific if EntryType is Oem.
        SensorType:
          $ref: '#/components/schemas/LogEntry_v1_1_5_SensorType'
          description: If the EntryType is SEL, this will have the sensor type that
            the log entry pertains to.
          nullable: true
          readOnly: true
          x-longDescription: This property shall be present if the EntryType value
            is SEL.  These enumerations are the values from table 42-3 of the IPMI
            specification.
        Severity:
          $ref: '#/components/schemas/LogEntry_v1_1_5_EventSeverity'
          description: This is the severity of the log entry.
          nullable: true
          readOnly: true
          x-longDescription: The value of this property shall be the severity of the
            condition resulting in the log entry, as defined in the Status section
            of the Redfish specificaiton.
      required:
      - EntryType
      - '@odata.id'
      - '@odata.type'
      - Id
      - Name
      type: object
      x-longDescription: This resource shall represent the log format for log services
        in a Redfish implementation.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_.]+$:
          description: This property shall specify a valid odata or Redfish property.
      x-requiredOnCreate:
      - EntryType
    LogEntry_v1_1_5_LogEntryCode:
      enum:
      - Assert
      - Deassert
      - Lower Non-critical - going low
      - Lower Non-critical - going high
      - Lower Critical - going low
      - Lower Critical - going high
      - Lower Non-recoverable - going low
      - Lower Non-recoverable - going high
      - Upper Non-critical - going low
      - Upper Non-critical - going high
      - Upper Critical - going low
      - Upper Critical - going high
      - Upper Non-recoverable - going low
      - Upper Non-recoverable - going high
      - Transition to Idle
      - Transition to Active
      - Transition to Busy
      - State Deasserted
      - State Asserted
      - Predictive Failure deasserted
      - Predictive Failure asserted
      - Limit Not Exceeded
      - Limit Exceeded
      - Performance Met
      - Performance Lags
      - Transition to OK
      - Transition to Non-Critical from OK
      - Transition to Critical from less severe
      - Transition to Non-recoverable from less severe
      - Transition to Non-Critical from more severe
      - Transition to Critical from Non-recoverable
      - Transition to Non-recoverable
      - Monitor
      - Informational
      - Device Removed / Device Absent
      - Device Inserted / Device Present
      - Device Disabled
      - Device Enabled
      - Transition to Running
      - Transition to In Test
      - Transition to Power Off
      - Transition to On Line
      - Transition to Off Line
      - Transition to Off Duty
      - Transition to Degraded
      - Transition to Power Save
      - Install Error
      - Fully Redundant
      - Redundancy Lost
      - Redundancy Degraded
      - Non-redundant:Sufficient Resources from Redundant
      - Non-redundant:Sufficient Resources from Insufficient Resources
      - Non-redundant:Insufficient Resources
      - Redundancy Degraded from Fully Redundant
      - Redundancy Degraded from Non-redundant
      - D0 Power State
      - D1 Power State
      - D2 Power State
      - D3 Power State
      type: string
      x-enumDescriptions:
        Assert: The condition has been asserted.
        D0 Power State: The ACPI defined D0 Power State.
        D1 Power State: The ACPI defined D1 Power State.
        D2 Power State: The ACPI defined D2 Power State.
        D3 Power State: The ACPI defined D3 Power State.
        Deassert: The condition has been deasserted.
        Device Disabled: A device has been disabled.
        Device Enabled: A device has been enabled.
        Device Inserted / Device Present: A device has been inserted or is now present.
        Device Removed / Device Absent: A device has been removed or is now absent.
        Fully Redundant: Indicates that full redundancy has been regained.
        Informational: An Informational event.
        Install Error: An Install Error has been detected.
        Limit Exceeded: A limit has been exceeded.
        Limit Not Exceeded: A limit has not been exceeded.
        Lower Critical - going high: The reading crossed the Lower Critical threshold
          while going high.
        Lower Critical - going low: The reading crossed the Lower Critical threshold
          while going low.
        Lower Non-critical - going high: The reading crossed the Lower Non-critical
          threshold while going high.
        Lower Non-critical - going low: The reading crossed the Lower Non-critical
          threshold while going low.
        Lower Non-recoverable - going high: The reading crossed the Lower Non-recoverable
          threshold while going high.
        Lower Non-recoverable - going low: The reading crossed the Lower Non-recoverable
          threshold while going low.
        Monitor: A Monitor event.
        Non-redundant:Insufficient Resources: Unit is non-redundant and has insufficient
          resource to maintain normal operation.
        Non-redundant:Sufficient Resources from Insufficient Resources: Unit has regianed
          minimum resources needed for normal operation.
        Non-redundant:Sufficient Resources from Redundant: Redundancy has been lost
          but unit is functioning with minimum resources needed for normal operation.
        Performance Lags: Performance does not meet expectations.
        Performance Met: Performance meets expectations.
        Predictive Failure asserted: A Predictive Failure has been detected.
        Predictive Failure deasserted: A Predictive Failure is no longer present.
        Redundancy Degraded: Redundancy still exists, but at less than full level.
        Redundancy Degraded from Fully Redundant: Unit has lost some redundant resource(s)
          but is still in a redundant state.
        Redundancy Degraded from Non-redundant: Unit has regained some resource(s)
          and is redundant but not fully redundant.
        Redundancy Lost: 'Entered any non-redundant state, including Non-redundant:
          Insufficient Resources.'
        State Asserted: The state has been asserted.
        State Deasserted: The state has been deasserted.
        Transition to Active: The state transitioned to active.
        Transition to Busy: The state transitioned to busy.
        Transition to Critical from Non-recoverable: A state has changed to Critical
          from Non-recoverable.
        Transition to Critical from less severe: A state has changed to Critical from
          less severe.
        Transition to Degraded: A state has transitioned to Degraded.
        Transition to Idle: The state transitioned to idle.
        Transition to In Test: A state has transitioned to In Test.
        Transition to Non-Critical from OK: A state has changed to Non-Critical from
          OK.
        Transition to Non-Critical from more severe: A state has changed to Non-Critical
          from more severe.
        Transition to Non-recoverable: A state has changed to Non-recoverable.
        Transition to Non-recoverable from less severe: A state has changed to Non-recoverable
          from less severe.
        Transition to OK: A state has changed to OK.
        Transition to Off Duty: A state has transitioned to Off Duty.
        Transition to Off Line: A state has transitioned to Off Line.
        Transition to On Line: A state has transitioned to On Line.
        Transition to Power Off: A state has transitioned to Power Off.
        Transition to Power Save: A state has transitioned to Power Save.
        Transition to Running: A state has transitioned to Running.
        Upper Critical - going high: The reading crossed the Upper Critical threshold
          while going high.
        Upper Critical - going low: The reading crossed the Upper Critical threshold
          while going low.
        Upper Non-critical - going high: The reading crossed the Upper Non-critical
          threshold while going high.
        Upper Non-critical - going low: The reading crossed the Upper Non-critical
          threshold while going low.
        Upper Non-recoverable - going high: The reading crossed the Upper Non-recoverable
          threshold while going high.
        Upper Non-recoverable - going low: The reading crossed the Upper Non-recoverable
          threshold while going low.
    LogEntry_v1_1_5_LogEntryType:
      enum:
      - Event
      - SEL
      - Oem
      type: string
      x-enumDescriptions:
        Event: Contains a Redfish-defined message (event).
        Oem: Contains an entry in an OEM-defined format.
        SEL: Contains a legacy IPMI System Event Log (SEL) entry.
    LogEntry_v1_1_5_SensorType:
      enum:
      - Platform Security Violation Attempt
      - Temperature
      - Voltage
      - Current
      - Fan
      - Physical Chassis Security
      - Processor
      - Power Supply / Converter
      - PowerUnit
      - CoolingDevice
      - Other Units-based Sensor
      - Memory
      - Drive Slot/Bay
      - POST Memory Resize
      - System Firmware Progress
      - Event Logging Disabled
      - System Event
      - Critical Interrupt
      - Button/Switch
      - Module/Board
      - Microcontroller/Coprocessor
      - Add-in Card
      - Chassis
      - ChipSet
      - Other FRU
      - Cable/Interconnect
      - Terminator
      - SystemBoot/Restart
      - Boot Error
      - BaseOSBoot/InstallationStatus
      - OS Stop/Shutdown
      - Slot/Connector
      - System ACPI PowerState
      - Watchdog
      - Platform Alert
      - Entity Presence
      - Monitor ASIC/IC
      - LAN
      - Management Subsystem Health
      - Battery
      - Session Audit
      - Version Change
      - FRUState
      type: string
      x-enumDescriptions:
        Add-in Card: A sensor for an add-in card.
        BaseOSBoot/InstallationStatus: A sensor for a base OS boot or installation
          status event.
        Battery: A sensor for a battery.
        Boot Error: A sensor for a boot error event.
        Button/Switch: A sensor for a button or switch.
        Cable/Interconnect: A sensor for a cable or interconnect type of device.
        Chassis: A sensor for a chassis.
        ChipSet: A sensor for a chipset.
        CoolingDevice: A sensor for a cooling device.
        Critical Interrupt: A sensor for a critical interrupt event.
        Current: A current sensor.
        Drive Slot/Bay: A sensor for a drive slot or bay.
        Entity Presence: A sensor for an entity presence event.
        Event Logging Disabled: A sensor for the event log.
        FRUState: A sensor for a FRU state event.
        Fan: A fan sensor.
        LAN: A sensor for a LAN device.
        Management Subsystem Health: A sensor for a management subsystem health event.
        Memory: A sensor for a memory device.
        Microcontroller/Coprocessor: A sensor for a microcontroller or coprocessor.
        Module/Board: A sensor for a module or board.
        Monitor ASIC/IC: A sensor for a monitor ASIC or IC.
        OS Stop/Shutdown: A sensor for an OS stop or shutdown event
        Other FRU: A sensor for an other type of FRU.
        Other Units-based Sensor: A sensor for a miscellaneous analog sensor.
        POST Memory Resize: A sensor for a POST memory resize event.
        Physical Chassis Security: A physical security sensor.
        Platform Alert: A sensor for a platform alert event.
        Platform Security Violation Attempt: A platform security sensor.
        Power Supply / Converter: A sensor for a power supply or DC-to-DC converter.
        PowerUnit: A sensor for a power unit.
        Processor: A sensor for a processor.
        Session Audit: A sensor for a session audit event.
        Slot/Connector: A sensor for a slot or connector.
        System ACPI PowerState: A sensor for an ACPI power state event.
        System Event: A sensor for a system event.
        System Firmware Progress: A sensor for a system firmware progress event.
        SystemBoot/Restart: A sensor for a system boot or restart event.
        Temperature: A temperature sensor.
        Terminator: A sensor for a terminator.
        Version Change: A sensor for a version change event.
        Voltage: A voltage sensor.
        Watchdog: A sensor for a watchdog event.
title: '#LogEntry.v1_1_5.LogEntry'
x-copyright: Copyright 2014-2018 DMTF. For the full DMTF copyright policy, see http://www.dmtf.org/about/policies/copyright
x-owningEntity: DMTF
x-release: '2016.2'
