components:
  schemas:
    Control_v1_0_5_Actions:
      additionalProperties: false
      description: The available actions for this resource.
      properties:
        Oem:
          $ref: '#/components/schemas/Control_v1_0_5_OemActions'
          description: The available OEM-specific actions for this resource.
          x-longDescription: This property shall contain the available OEM-specific
            actions for this resource.
      type: object
      x-longDescription: This type shall contain the available actions for this resource.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Control_v1_0_5_Control:
      additionalProperties: false
      description: The `Control` schema describes a control point and its properties.
      properties:
        '@odata.context':
          $ref: http://redfish.dmtf.org/schemas/v1/odata-v4.yaml#/components/schemas/odata-v4_context
        '@odata.etag':
          $ref: http://redfish.dmtf.org/schemas/v1/odata-v4.yaml#/components/schemas/odata-v4_etag
        '@odata.id':
          $ref: http://redfish.dmtf.org/schemas/v1/odata-v4.yaml#/components/schemas/odata-v4_id
        '@odata.type':
          $ref: http://redfish.dmtf.org/schemas/v1/odata-v4.yaml#/components/schemas/odata-v4_type
        Accuracy:
          description: The estimated percent error of measured versus actual values.
          nullable: true
          readOnly: true
          type: number
          x-longDescription: This property shall contain the percent error of the
            measured versus actual values of the `SetPoint` property.
          x-units: '%'
        Actions:
          $ref: '#/components/schemas/Control_v1_0_5_Actions'
          description: The available actions for this resource.
          x-longDescription: This property shall contain the available actions for
            this resource.
        AllowableMax:
          description: The maximum possible setting for this control.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Control
          x-longDescription: This property shall indicate the maximum possible value
            of the `SetPoint` or `SettingMax` properties for this control.  Services
            shall not accept values for `SetPoint` or `SettingMax` above this value.
        AllowableMin:
          description: The minimum possible setting for this control.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Control
          x-longDescription: This property shall indicate the minimum possible value
            of the `SetPoint` or `SettingMin` properties for this control.  Services
            shall not accept values for `SetPoint` or `SettingMin` below this value.
        AllowableNumericValues:
          description: The supported values for the set point.
          items:
            nullable: true
            type: number
          readOnly: true
          type: array
          x-excerpt: ControlRange
          x-longDescription: This property shall contain the supported values for
            this control.  The units shall follow the value of `SetPointUnits`.  This
            property should only be present when the set point or range has a limited
            set of supported values that cannot be accurately described using the
            `Increment` property.
        AssociatedSensors:
          description: An array of links to the sensors associated with this control.
          items:
            $ref: http://redfish.dmtf.org/schemas/v1/odata-v4.yaml#/components/schemas/odata-v4_idRef
          readOnly: true
          type: array
          x-longDescription: This property shall contain an array of links to resources
            of type `Sensor` that represent the sensors related to this control.
        AssociatedSensors@odata.count:
          $ref: http://redfish.dmtf.org/schemas/v1/odata-v4.yaml#/components/schemas/odata-v4_count
        ControlDelaySeconds:
          description: The time delay in seconds before the control will activate
            once the value has deviated from the set point.
          nullable: true
          readOnly: false
          type: number
          x-longDescription: This property shall contain the time in seconds that
            will elapse after the control value deviates above or below the value
            of `SetPoint` before the control will activate.
        ControlLoop:
          $ref: '#/components/schemas/Control_v1_0_5_ControlLoop'
          description: The control loop details.
          x-excerpt: ControlSingleLoop
          x-longDescription: This property shall contain the details for the control
            loop described by this resource.
        ControlMode:
          description: The current operating mode of the control.
          oneOf:
          - $ref: '#/components/schemas/Control_v1_0_5_ControlMode'
          - enum:
            - null
          readOnly: false
          x-excerpt: Control
          x-longDescription: This property shall contain the operating mode of the
            control.
        ControlType:
          description: The type of control.
          oneOf:
          - $ref: '#/components/schemas/Control_v1_0_5_ControlType'
          - enum:
            - null
          readOnly: true
          x-longDescription: This property shall contain the type of the control.
        DeadBand:
          description: The maximum deviation from the set point allowed before the
            control will activate.
          nullable: true
          readOnly: false
          type: number
          x-longDescription: This property shall contain the maximum deviation value
            allowed above or below the value of `SetPoint` before the control will
            activate.
        Description:
          oneOf:
          - $ref: http://redfish.dmtf.org/schemas/v1/Resource.yaml#/components/schemas/Resource_Description
          - enum:
            - null
          readOnly: true
        Id:
          $ref: http://redfish.dmtf.org/schemas/v1/Resource.yaml#/components/schemas/Resource_Id
          readOnly: true
        Implementation:
          description: The implementation of the control.
          oneOf:
          - $ref: '#/components/schemas/Control_v1_0_5_ImplementationType'
          - enum:
            - null
          readOnly: true
          x-longDescription: This property shall contain the implementation of the
            control.
        Increment:
          description: The smallest increment supported for the set point.
          nullable: true
          readOnly: true
          type: number
          x-longDescription: This property shall contain the smallest change allowed
            to the value of the `SetPoint`, `SettingMin`, or `SettingMax` properties.  The
            units shall follow the value of `SetPointUnits`.
        Location:
          $ref: http://redfish.dmtf.org/schemas/v1/Resource.yaml#/components/schemas/Resource_Location
          description: The location information for this control.
          x-longDescription: This property shall indicate the location information
            for this control.
        Name:
          $ref: http://redfish.dmtf.org/schemas/v1/Resource.yaml#/components/schemas/Resource_Name
          readOnly: true
        Oem:
          $ref: http://redfish.dmtf.org/schemas/v1/Resource.yaml#/components/schemas/Resource_Oem
          description: The OEM extension property.
          x-longDescription: This property shall contain the OEM extensions.  All
            values for properties that this object contains shall conform to the Redfish
            Specification-described requirements.
        PhysicalContext:
          description: The area or device to which this control applies.
          oneOf:
          - $ref: http://redfish.dmtf.org/schemas/v1/PhysicalContext.yaml#/components/schemas/PhysicalContext_PhysicalContext
          - enum:
            - null
          readOnly: true
          x-longDescription: This property shall contain a description of the affected
            component or region within the equipment to which this control applies.
        PhysicalSubContext:
          description: The usage or location within a device to which this control
            applies.
          oneOf:
          - $ref: http://redfish.dmtf.org/schemas/v1/PhysicalContext.yaml#/components/schemas/PhysicalContext_PhysicalSubContext
          - enum:
            - null
          readOnly: true
          x-longDescription: This property shall contain a description of the usage
            or sub-region within the equipment to which this control applies.  This
            property generally differentiates multiple controls within the same `PhysicalContext`
            instance.
        RelatedItem:
          description: An array of links to resources that this control services.
          items:
            $ref: http://redfish.dmtf.org/schemas/v1/odata-v4.yaml#/components/schemas/odata-v4_idRef
          readOnly: true
          type: array
          x-longDescription: This property shall contain an array of links to resources
            that this control services.
        RelatedItem@odata.count:
          $ref: http://redfish.dmtf.org/schemas/v1/odata-v4.yaml#/components/schemas/odata-v4_count
        Sensor:
          description: The sensor reading associated with this control.
          oneOf:
          - $ref: http://redfish.dmtf.org/schemas/v1/Sensor.yaml#/components/schemas/Sensor_SensorExcerpt
          - enum:
            - null
          x-excerptCopy: SensorExcerpt
          x-longDescription: This property shall contain the `Sensor` excerpt directly
            associated with this control.  The value of the `DataSourceUri` property
            shall reference a resource of type `Sensor`.  This property shall not
            be present if multiple sensors are associated with a single control.
        SetPoint:
          description: The desired set point of the control.
          nullable: true
          readOnly: false
          type: number
          x-excerpt: ControlSingle,ControlSingleLoop,ControlNode
          x-longDescription: This property shall contain the desired set point control
            value.  The units shall follow the value of `SetPointUnits`.  If the `DefaultSetPoint`
            property is not supported and if a user-defined set point is not configured,
            the property may contain `null` in responses.
        SetPointType:
          description: The set point type used to operate the control.
          oneOf:
          - $ref: '#/components/schemas/Control_v1_0_5_SetPointType'
          - enum:
            - null
          readOnly: true
          x-longDescription: This property shall contain the type of set point definitions
            used to describe this control.
        SetPointUnits:
          description: The units of the set point and related properties in UCUM c/s
            format.
          nullable: true
          readOnly: true
          type: string
          x-excerpt: ControlNode
          x-longDescription: This property shall contain the units of the control's
            set point and related properties.  The value shall follow the case-sensitive
            symbol format defined by the Unified Code for Units of Measure (UCUM),
            as specified by the 'Units of measure annotation' clause of the Redfish
            Specification.
        SetPointUpdateTime:
          description: The date and time that the set point was changed.
          format: date-time
          nullable: true
          readOnly: true
          type: string
          x-longDescription: This property shall contain the date and time that the
            value of `SetPoint` was last changed.
        SettingMax:
          description: The maximum set point in the allowed range.
          nullable: true
          readOnly: false
          type: number
          x-excerpt: ControlRange
          x-longDescription: This property shall contain the maximum desired set point
            within the acceptable range.  The service shall reject values greater
            than the value of `AllowableMax`.  The units shall follow the value of
            `SetPointUnits`.
        SettingMin:
          description: The minimum set point in the allowed range.
          nullable: true
          readOnly: false
          type: number
          x-excerpt: ControlRange
          x-longDescription: This property shall contain the minimum desired set point
            within the acceptable range.  The service shall reject values less than
            the value of `AllowableMin`.  The units shall follow the value of `SetPointUnits`.
        Status:
          $ref: http://redfish.dmtf.org/schemas/v1/Resource.yaml#/components/schemas/Resource_Status
          description: The status and health of the resource and its subordinate or
            dependent resources.
          x-longDescription: This property shall contain any status or health properties
            of the resource.
      required:
      - '@odata.id'
      - '@odata.type'
      - Id
      - Name
      type: object
      x-longDescription: This resource shall represent a control point for a Redfish
        implementation.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Control_v1_0_5_ControlExcerpt:
      additionalProperties: false
      description: The `Control` schema describes a control point and its properties.
      properties:
        AllowableMax:
          description: The maximum possible setting for this control.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Control
          x-longDescription: This property shall indicate the maximum possible value
            of the `SetPoint` or `SettingMax` properties for this control.  Services
            shall not accept values for `SetPoint` or `SettingMax` above this value.
        AllowableMin:
          description: The minimum possible setting for this control.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Control
          x-longDescription: This property shall indicate the minimum possible value
            of the `SetPoint` or `SettingMin` properties for this control.  Services
            shall not accept values for `SetPoint` or `SettingMin` below this value.
        ControlMode:
          description: The current operating mode of the control.
          oneOf:
          - $ref: '#/components/schemas/Control_v1_0_5_ControlMode'
          - enum:
            - null
          readOnly: false
          x-excerpt: Control
          x-longDescription: This property shall contain the operating mode of the
            control.
        DataSourceUri:
          description: The link to the resource that provides the data for this control.
          format: uri-reference
          nullable: true
          readOnly: true
          type: string
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain a URI to the resource that
            provides the source of the excerpt contained within this copy.  If no
            source resource is implemented, meaning the excerpt represents the only
            available data, this property shall not be present.
        Reading:
          description: The reading of the sensor associated with this control.
          nullable: true
          readOnly: true
          type: number
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain the value of the `Reading`
            property of the `Sensor` resource directly associated with this control.  This
            property shall not be present if multiple sensors are associated with
            a single control.
      type: object
      x-excerpt: Control
      x-longDescription: This resource shall represent a control point for a Redfish
        implementation.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Control_v1_0_5_ControlLoop:
      additionalProperties: false
      description: The details and coefficients used to operate a control loop.
      properties:
        CoefficientUpdateTime:
          description: The date and time that the control loop coefficients were changed.
          format: date-time
          nullable: true
          readOnly: true
          type: string
          x-longDescription: This property shall contain the date and time that any
            of the coefficients for the control loop were last changed.
        Differential:
          description: The differential coefficient.
          nullable: true
          readOnly: false
          type: number
          x-excerpt: ControlSingleLoop
          x-longDescription: This property shall contain the coefficient for the differential
            factor in a control loop.
        Integral:
          description: The integral coefficient.
          nullable: true
          readOnly: false
          type: number
          x-excerpt: ControlSingleLoop
          x-longDescription: This property shall contain the coefficient for the integral
            factor in a control loop.
        Proportional:
          description: The proportional coefficient.
          nullable: true
          readOnly: false
          type: number
          x-excerpt: ControlSingleLoop
          x-longDescription: This property shall contain the coefficient for the proportional
            factor in a control loop.
      type: object
      x-longDescription: This type shall describe the details of a control loop.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Control_v1_0_5_ControlMode:
      enum:
      - Automatic
      - Override
      - Manual
      - Disabled
      type: string
      x-enumDescriptions:
        Automatic: Automatically adjust control to meet the set point.
        Disabled: The control has been disabled.
        Manual: No automatic adjustments are made to the control.
        Override: User override of the automatic set point value.
    Control_v1_0_5_ControlNodeExcerpt:
      additionalProperties: false
      description: The `Control` schema describes a control point and its properties.
      properties:
        AllowableMax:
          description: The maximum possible setting for this control.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Control
          x-longDescription: This property shall indicate the maximum possible value
            of the `SetPoint` or `SettingMax` properties for this control.  Services
            shall not accept values for `SetPoint` or `SettingMax` above this value.
        AllowableMin:
          description: The minimum possible setting for this control.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Control
          x-longDescription: This property shall indicate the minimum possible value
            of the `SetPoint` or `SettingMin` properties for this control.  Services
            shall not accept values for `SetPoint` or `SettingMin` below this value.
        ControlMode:
          description: The current operating mode of the control.
          oneOf:
          - $ref: '#/components/schemas/Control_v1_0_5_ControlMode'
          - enum:
            - null
          readOnly: false
          x-excerpt: Control
          x-longDescription: This property shall contain the operating mode of the
            control.
        DataSourceUri:
          description: The link to the resource that provides the data for this control.
          format: uri-reference
          nullable: true
          readOnly: true
          type: string
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain a URI to the resource that
            provides the source of the excerpt contained within this copy.  If no
            source resource is implemented, meaning the excerpt represents the only
            available data, this property shall not be present.
        Reading:
          description: The reading of the sensor associated with this control.
          nullable: true
          readOnly: true
          type: number
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain the value of the `Reading`
            property of the `Sensor` resource directly associated with this control.  This
            property shall not be present if multiple sensors are associated with
            a single control.
        ReadingUnits:
          description: The units of the sensor reading associated with this control.
          nullable: true
          readOnly: true
          type: string
          x-excerpt: ControlNode
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain the units of the sensor's
            reading and thresholds.  This property shall not be present if multiple
            sensors are associated with a single control.
        SetPoint:
          description: The desired set point of the control.
          nullable: true
          readOnly: false
          type: number
          x-excerpt: ControlSingle,ControlSingleLoop,ControlNode
          x-longDescription: This property shall contain the desired set point control
            value.  The units shall follow the value of `SetPointUnits`.  If the `DefaultSetPoint`
            property is not supported and if a user-defined set point is not configured,
            the property may contain `null` in responses.
        SetPointUnits:
          description: The units of the set point and related properties in UCUM c/s
            format.
          nullable: true
          readOnly: true
          type: string
          x-excerpt: ControlNode
          x-longDescription: This property shall contain the units of the control's
            set point and related properties.  The value shall follow the case-sensitive
            symbol format defined by the Unified Code for Units of Measure (UCUM),
            as specified by the 'Units of measure annotation' clause of the Redfish
            Specification.
      type: object
      x-excerpt: ControlNode
      x-longDescription: This resource shall represent a control point for a Redfish
        implementation.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Control_v1_0_5_ControlRangeExcerpt:
      additionalProperties: false
      description: The `Control` schema describes a control point and its properties.
      properties:
        AllowableMax:
          description: The maximum possible setting for this control.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Control
          x-longDescription: This property shall indicate the maximum possible value
            of the `SetPoint` or `SettingMax` properties for this control.  Services
            shall not accept values for `SetPoint` or `SettingMax` above this value.
        AllowableMin:
          description: The minimum possible setting for this control.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Control
          x-longDescription: This property shall indicate the minimum possible value
            of the `SetPoint` or `SettingMin` properties for this control.  Services
            shall not accept values for `SetPoint` or `SettingMin` below this value.
        AllowableNumericValues:
          description: The supported values for the set point.
          items:
            nullable: true
            type: number
          readOnly: true
          type: array
          x-excerpt: ControlRange
          x-longDescription: This property shall contain the supported values for
            this control.  The units shall follow the value of `SetPointUnits`.  This
            property should only be present when the set point or range has a limited
            set of supported values that cannot be accurately described using the
            `Increment` property.
        ControlMode:
          description: The current operating mode of the control.
          oneOf:
          - $ref: '#/components/schemas/Control_v1_0_5_ControlMode'
          - enum:
            - null
          readOnly: false
          x-excerpt: Control
          x-longDescription: This property shall contain the operating mode of the
            control.
        DataSourceUri:
          description: The link to the resource that provides the data for this control.
          format: uri-reference
          nullable: true
          readOnly: true
          type: string
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain a URI to the resource that
            provides the source of the excerpt contained within this copy.  If no
            source resource is implemented, meaning the excerpt represents the only
            available data, this property shall not be present.
        Reading:
          description: The reading of the sensor associated with this control.
          nullable: true
          readOnly: true
          type: number
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain the value of the `Reading`
            property of the `Sensor` resource directly associated with this control.  This
            property shall not be present if multiple sensors are associated with
            a single control.
        SettingMax:
          description: The maximum set point in the allowed range.
          nullable: true
          readOnly: false
          type: number
          x-excerpt: ControlRange
          x-longDescription: This property shall contain the maximum desired set point
            within the acceptable range.  The service shall reject values greater
            than the value of `AllowableMax`.  The units shall follow the value of
            `SetPointUnits`.
        SettingMin:
          description: The minimum set point in the allowed range.
          nullable: true
          readOnly: false
          type: number
          x-excerpt: ControlRange
          x-longDescription: This property shall contain the minimum desired set point
            within the acceptable range.  The service shall reject values less than
            the value of `AllowableMin`.  The units shall follow the value of `SetPointUnits`.
      type: object
      x-excerpt: ControlRange
      x-longDescription: This resource shall represent a control point for a Redfish
        implementation.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Control_v1_0_5_ControlSingleExcerpt:
      additionalProperties: false
      description: The `Control` schema describes a control point and its properties.
      properties:
        AllowableMax:
          description: The maximum possible setting for this control.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Control
          x-longDescription: This property shall indicate the maximum possible value
            of the `SetPoint` or `SettingMax` properties for this control.  Services
            shall not accept values for `SetPoint` or `SettingMax` above this value.
        AllowableMin:
          description: The minimum possible setting for this control.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Control
          x-longDescription: This property shall indicate the minimum possible value
            of the `SetPoint` or `SettingMin` properties for this control.  Services
            shall not accept values for `SetPoint` or `SettingMin` below this value.
        ControlMode:
          description: The current operating mode of the control.
          oneOf:
          - $ref: '#/components/schemas/Control_v1_0_5_ControlMode'
          - enum:
            - null
          readOnly: false
          x-excerpt: Control
          x-longDescription: This property shall contain the operating mode of the
            control.
        DataSourceUri:
          description: The link to the resource that provides the data for this control.
          format: uri-reference
          nullable: true
          readOnly: true
          type: string
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain a URI to the resource that
            provides the source of the excerpt contained within this copy.  If no
            source resource is implemented, meaning the excerpt represents the only
            available data, this property shall not be present.
        Reading:
          description: The reading of the sensor associated with this control.
          nullable: true
          readOnly: true
          type: number
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain the value of the `Reading`
            property of the `Sensor` resource directly associated with this control.  This
            property shall not be present if multiple sensors are associated with
            a single control.
        SetPoint:
          description: The desired set point of the control.
          nullable: true
          readOnly: false
          type: number
          x-excerpt: ControlSingle,ControlSingleLoop,ControlNode
          x-longDescription: This property shall contain the desired set point control
            value.  The units shall follow the value of `SetPointUnits`.  If the `DefaultSetPoint`
            property is not supported and if a user-defined set point is not configured,
            the property may contain `null` in responses.
      type: object
      x-excerpt: ControlSingle
      x-longDescription: This resource shall represent a control point for a Redfish
        implementation.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Control_v1_0_5_ControlSingleLoopExcerpt:
      additionalProperties: false
      description: The `Control` schema describes a control point and its properties.
      properties:
        AllowableMax:
          description: The maximum possible setting for this control.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Control
          x-longDescription: This property shall indicate the maximum possible value
            of the `SetPoint` or `SettingMax` properties for this control.  Services
            shall not accept values for `SetPoint` or `SettingMax` above this value.
        AllowableMin:
          description: The minimum possible setting for this control.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Control
          x-longDescription: This property shall indicate the minimum possible value
            of the `SetPoint` or `SettingMin` properties for this control.  Services
            shall not accept values for `SetPoint` or `SettingMin` below this value.
        ControlLoop:
          $ref: '#/components/schemas/Control_v1_0_5_ControlLoop'
          description: The control loop details.
          x-excerpt: ControlSingleLoop
          x-longDescription: This property shall contain the details for the control
            loop described by this resource.
        ControlMode:
          description: The current operating mode of the control.
          oneOf:
          - $ref: '#/components/schemas/Control_v1_0_5_ControlMode'
          - enum:
            - null
          readOnly: false
          x-excerpt: Control
          x-longDescription: This property shall contain the operating mode of the
            control.
        DataSourceUri:
          description: The link to the resource that provides the data for this control.
          format: uri-reference
          nullable: true
          readOnly: true
          type: string
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain a URI to the resource that
            provides the source of the excerpt contained within this copy.  If no
            source resource is implemented, meaning the excerpt represents the only
            available data, this property shall not be present.
        Reading:
          description: The reading of the sensor associated with this control.
          nullable: true
          readOnly: true
          type: number
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain the value of the `Reading`
            property of the `Sensor` resource directly associated with this control.  This
            property shall not be present if multiple sensors are associated with
            a single control.
        SetPoint:
          description: The desired set point of the control.
          nullable: true
          readOnly: false
          type: number
          x-excerpt: ControlSingle,ControlSingleLoop,ControlNode
          x-longDescription: This property shall contain the desired set point control
            value.  The units shall follow the value of `SetPointUnits`.  If the `DefaultSetPoint`
            property is not supported and if a user-defined set point is not configured,
            the property may contain `null` in responses.
      type: object
      x-excerpt: ControlSingleLoop
      x-longDescription: This resource shall represent a control point for a Redfish
        implementation.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Control_v1_0_5_ControlType:
      enum:
      - Temperature
      - Power
      - Frequency
      type: string
      x-enumDescriptions:
        Frequency: Frequency (Hz) control.
        Power: Power (W) control or power limit.
        Temperature: Temperature (C) control or thermostat.
      x-enumLongDescriptions:
        Frequency: This value shall indicate a control used to limit the operating
          frequency, in hertz units, of a device, either to a single set point or
          within a range.  The `SetPointUnits` property shall contain `Hz`.
        Power: This value shall indicate a control used to regulate or limit maximum
          power consumption, in watt units, either to a single set point or within
          a range.  The `SetPointUnits` property shall contain `W`.
        Temperature: This value shall indicate a control used to regulate temperature,
          in degree Celsius units, either to a single set point or within a range.  The
          `SetPointUnits` property shall contain `Cel`.
    Control_v1_0_5_ImplementationType:
      enum:
      - Programmable
      - Direct
      - Monitored
      type: string
      x-enumDescriptions:
        Direct: The set point directly affects the control value.
        Monitored: A physical control that cannot be adjusted through this interface.
        Programmable: The set point can be adjusted through this interface.
    Control_v1_0_5_OemActions:
      additionalProperties: true
      description: The available OEM-specific actions for this resource.
      properties: {}
      type: object
      x-longDescription: This type shall contain the available OEM-specific actions
        for this resource.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Control_v1_0_5_SetPointType:
      enum:
      - Single
      - Range
      type: string
      x-enumDescriptions:
        Range: Control uses a range of values.
        Single: Control uses a single set point.
      x-enumLongDescriptions:
        Range: This value shall indicate the control utilizes a set point range for
          its operation.  The `SettingMin` and `SettingMax` properties shall be present
          for this control type.  The `SetPoint` property shall not be present for
          this control type.
        Single: This value shall indicate the control utilizes a single set point
          for its operation.  The `SetPoint` property shall be present for this control
          type.  The `SettingMin` and `SettingMax` properties shall not be present
          for this control type.
title: '#Control.v1_0_5.Control'
x-copyright: Copyright 2014-2025 DMTF. For the full DMTF copyright policy, see http://www.dmtf.org/about/policies/copyright
x-language: en
x-owningEntity: DMTF
x-release: '2021.2'
